In this guide, we will be comparing Bosch 4100XC-10 vs. DeWalt E 7491RS table saws. Both saws are ideal for those who need a table saw at the job site or advanced users that need a high-quality saw. With their quality, they provide all the strength you need for ripping and cutting work. The table saws have different speeds, blade brakes, rip and bevel capacities, and fences. Despite this, both are very popular among woodworking enthusiasts. In this guide, we cover the main differences between the two table saws and assist with your buying decisions.
| Bosch 4100XC-10 | Dewalt E 7491RS | |
| Motor power | 15 A | 15 A |
| Arbor size | 5/8″ | 5/8″ |
| Blade diameter | 10″ | 10″ |
| Table dimensions | 30″ x 22-1/2″ | 26-3/8″ x 21-7/8″ |
| No load RPM | 3650 | 4800 |
| Rip capacity (right) | 30″ | 32-1/2″ |
| Rip capacity (left) | 8.5″ | 20″ |
| Max. bevel capacity | 47° | 57° |
| Max. depth of cut at 90° | 3-1/8″ | 3-1/8″ |
| Max. depth of cut at 45° | 2-1/4″ | 2-1/4″ |
| Dimensions | 27″ x 32.5″ x 13″ | 31″ x 24.5″ x 31″ |
| Weight | 94 lb | 90 lb |
| Warranty | 1 year | 3 years |
| VIEW ON AMAZON | VIEW ON AMAZON |
The Bosch 4100XC-10 and DeWalt E 7491RS saws come with the same horsepower of 2.4 on their motors, and this is combined with a 10-inch blade. There isn’t much of a price difference between the two table saws, but the DeWalt E 7491RS is a better choice for those on a budget. The table saw is cheaper, with a quick-attach riving knife function, and ideal for newcomers to woodwork. Furthermore, it has a couple of features that Bosch lacks.
On the other hand, the Bosch 4100XC-10 table saw comes with some advanced features that justify the extra few dollars that you need to spend. These include the blade brake, a soft-start motor, a rear outfeed extension, and anti-kickback pawls. Depending on your needs and preferences, you can decide which table saw you want to use. Some of the advantages of using the Bosch are the smooth, quiet operation and the large power button that you can easily find during an emergency. It also restarts in case of power loss to protect you. Plus, it comes with an auxiliary fence that allows you to make narrow cuts. But on the downside, the Bosch is heavier than its competitors, and it ends up collecting dust inside the cabinet.
As for the DeWalt model, it comes with an impressive 32 ½” rip capacity, which is very large for its category. Plus, it comes with a power loss reset that will stop the saw from turning on after an accidental power loss. This prevents the user from getting harmed if they are near it. The stand of the DeWalt saw is stable and easy to set up, and it has a precise rack-and-pinion fence. But on the downside, the miter gauge is imprecise.
It’s important to consider the speed of your table saw Trusted Source Table saw - Wikipedia A table saw (also known as a sawbench or bench saw in England) is a woodworking tool, consisting of a circular saw blade, mounted on an arbor, that is driven by an electric motor (either directly, by belt, or by gears). The blade protrudes through the top of a table, which provides support for the material, usually wood, being cut. en.wikipedia.org before purchasing it. The DeWalt model has a higher blade RPM, which stands for revolutions per minute, than the Bosch model.
The average speed for a table saw in woodwork is between 130 and 170 feet per second.
The Bosch has an RPM of 3,650, while the DeWalt blade has an impressive speed of 4,800 RPM. This gives the DeWalt table saw a cutting speed of 200 feet per second, while the Bosch has a lower speed of 159 feet per second. The DeWalt E 7491RS has a much better speed than the Bosch 4100XC-10, especially since it’s above the average. But the Bosch is still in the average range.
But despite this, both have the same horsepower engine and the same motor power of 15 amp, so this might not affect your buying decision. Both models also have the same blade diameter of 10 inches. If you’re still worried about speed, the DeWalt model has the edge over the Bosch for its blade RPM.
Another factor that you should consider when choosing the best table saw for your use is the rip capacity. The DeWalt E 7491RS comes with an impressive rip capacity of 32-½ inches. This has a higher capacity than the Bosch, which has a rip capacity of 30 inches instead.
Most woodworkers need to have a rip capacity of anything over 24 inches because you might have to rip an 8’ x 4’ sheet into two at any time or another. Both models give you very high rip capacities, so you can enjoy woodworking with any kind of sheet.
Higher rip capacity means you’re getting a heavier, larger saw, so consider this when making your choice. But, if you regularly need to panel up a house, you will need as many inches on the table saw as possible to rip sheets. This gives the DeWalt model an edge over the Bosch, with an extra 2-½ inch capacity. You can consider either option based on your needs.
It’s also important to look at the bevel capacity of the table saw that you are purchasing.
The bevel capacity allows you to make cuts on your workpiece at an angle that is not the same as one of the faces.
The DeWalt model does not clearly state what their full bevel capacity is, only that you should not take the blade over 45 degrees when the blade guard is attached. This leads us to guess that the bevel capacity is up to 45 degrees. On the other hand, the Bosch has its bevel capacity listed in its specs. This states a capacity from -2 degrees to +47 degrees. This makes it easy for you to create miters with an exact fit, as there is a lot of flexibility and leeway provided by the Bosch 4100XC-10. So, it has the edge over the DeWalt E 7491RS model.
When it comes to power, the Bosch 4100XC-10 and DeWalt E 7491RS are quite similar. Both saws come with cords and run on 120 v. They also draw 15 amps. Since the standard US residential circuits have the same specs, you can plug the machine anywhere to use it. It’s still important to check your socket before plugging it in. The horsepower of the two saws is also similar, at 2.4. Don’t depend your research solely on these numbers because the manufacturers test the saws in ideal conditions.
You also need a dust collection feature on your table saw because of the sawdust that will go around while cutting. This prevents it from going into your eye and reduces your chances of inhaling it.
Fortunately, the DeWalt E 7491RS comes with a 2-inch dust collection port that will easily connect with a vacuum. So, you can efficiently get rid of dust and reduce the chances of making a mess. But there are two dust collection ports. If you forget to block the second, you will end up with a mess of sawdust either way.
On the other hand, the Bosch 4100XC-10 does not have a dust port. It ends up collecting dust inside the cabinet and will make a mess if handled wrongly. It’s advisable to use safety precautions like the best woodworking aprons to stop the dust from affecting your clothes. In this case, the DeWalt model has the edge over the Bosch, especially with the lower price of the former.
When checking the fence on your table saw, there are three factors you need to consider. For one, it should adjust smoothly. It should also maintain a parallel and square cut when locked in a new position, and it should be parallel to the blade. The fences on both models meet these standards, so if this is what you’re considering, you’re covered. The DeWalt and Bosch saws go the extra mile to have some additional features. This is a mechanism for a thinner edge, which makes narrow rip cuts possible.
Another feature added to the table saws is sheet support. As you’re cutting a sheet with the fence extended in the air, the sheet support will keep the sheet edge the same as the tabletop. This keeps the sheet edge stable throughout the cut.
Keep in mind that the Bosch allows for narrow rip cuts, but it does not provide sheet support. It is designed with large knuts, so you have to unscrew them and put them back when using the sheet support. As for the DeWalt, it allows you to switch between both using a unique mechanism.
You need a stand to come with your table saw so that you can avoid extra purchases. The stand is a workbench that will hold your saw in space and might even provide storage space for your items.
The DeWalt E 7491RS model comes with a rolling stand, which gives you a free-rolling surface for planning and sawing. The rolling stand can be easily set up and disassembled and provides excellent stability. It is designed with heavy-duty wheels, too, so you can move your table saw over curbs, steps, and debris.
As for the Bosch 4100XC-10, it is designed with a gravity-rise wheeled stand. This kind of table saw stand makes it easy for you to set up your workspace. It also improves job site mobility. But, the gravity-rise stand requires some help to set up, and you might need an extra set of hands to hold the pieces in place during assembly.
Both models come with a miter gauge in the box, which is a device that helps you hold the workpiece at a particular angle while you’re cutting it with the saw.
They have the same slot dimensions of 3/4” W by 3/8” D. But keep in mind that customers have complained about the DeWalt 7491RS having an imprecise miter gauge. It might have been rectified on the newer models, but it’s important to check before you purchase. Luckily, the flexible nature of the Bosch bever capacity makes it easy for you to create miters with a good fit.
When it comes to safety Trusted Source Table Saw Safety Rules Special training is required before using the table saw. You may not operate it without permission from a shop technician. Stand to one side, never directly in line with, of work being fed through the saw. www.lsu.edu , the Bosch 4100XC-10 does much better than the DeWalt E 7491RS, making it worth enough for its high price.
There are barely any safety features on the DeWalt, but if you’re worried about this, you should opt for the Bosch model instead. For one, it comes with soft-start circuitry, which will manage how intense the motor startup is. This reduces the chances of tripping the circuit breaker and will make it much safer. Another feature is the constant response circuitry, which will maintain the speed of the device under load to prevent overloading. The Bosch table saw also comes with a restart protection feature. This prevents an accidental startup on the saw. You will get a smart guard system, which consists of anti-kickback pawls and a riving knife. This provides protection while the guard assembly places a barrier to stop the blade from injuring you while still giving you an unobstructed view of what you’re cutting.
Both the Bosch 4100XC-10 and the DeWalt E 7491RS are portable table saws, but the former is bigger than the latter.
The Bosch model has a width of 30 inches and a depth of 22-½-inch, while the DeWalt features 26 3/8-inch and 21 7/8-inch, respectively. Also, the Bosch weighs 94 pounds, while DeWalt weighs about four pounds less. So, you can carry the DeWalt easier, especially with the wheels on the stand.
It’s easier to carry the DeWalt since it is designed with a telescoping fence rail, despite the higher rip capacity. The rail can extend and retract easily, creating a small portable package that you can carry from place to place. With heavy-duty wheels, it can roll over steps, debris, and curbs. This doesn’t mean that the Bosch model does not provide portability. Its gravity-rise wheeled stand is very light, also making it easy to set up and take down. The stand is also lightweight for convenient use.
In terms of price, DeWalt and Bosch don’t have many differences. It’s important to set a budget between $600 and $700 if you want to purchase any of them. DeWalt is more affordable than the Bosch model, but the latter comes with better security features. But the only difference is about $50.
In general, the DeWalt provides the best value for money with a wider rip capacity, a flip-over auxiliary rip fence, and a quick attach-removal riving knife. But the Bosch is better for professional use and comes with a high price tag for this.
The DeWalt model comes with a 3-year limited warranty, protecting you from any damage as long as you follow the manual. It also comes with a 1-year free service contract and a 90-day money-back guarantee in case you’re not satisfied with your purchase.
On the other hand, the Bosch model only comes with a 1-year manufacturing warranty, which is much less disappointing, especially with the higher price.
The DeWalt E 7491RS and Bosch 4100XC-10 are both amazing table saws that you can consider using, but your choice depends on two main factors, which are the amount you wish to spend and what you intend to use the table saw for.
In our Bosch 4100XC-10 vs. DeWalt 7491RS review, we compared both table saws to help you decide the one you want. We recommend the DeWalt model for home woodworkers, which has an affordable price and comes from a good brand. It also comes with a few excellent additions that will make your woodworking experience easier.
On the other hand, professionals should lean towards the Bosch model, especially since it comes with good after-sale support. The features make it safer to use and also improve the ease of use. Plus, it has a massive tabletop that you allow for massive projects.
